Pellet Stove Dealers Near Me
Pellet stoves use solid combustible pellets made from compressed sawdust or wood waste to heat up your home. Certain models burn biofuels, such as nutshells or corn kernels.
Pellet stoves are not equipped with chimneys and require electricity to power the auger that is used to feed pellets into the fire. To this end, some manufacturers offer backup battery systems to ensure your stove will continue to operate in a power outage.
Freestanding Pellet Stoves
Homeowners looking for additional heat typically opt for freestanding pellet stoves. They can be used for heating one room or several rooms and are simple to clean and operate. They are able to burn pellets made of compressed sawdust that looks like the kind your pet rabbit could consume. The pellets are kept in the hopper, and an electric auger is used to feed the pellets into the stove's combustion chamber to start the combustion process. The wood pellets emit heat that is circulated by an air blower and spreads throughout the room. This kind of heat is less expensive than gas furnaces or ductless mini split, and is more attractive than traditional wood stoves.
Pellet stoves can be minimalist in design and is less intrusive than models that burn wood. They're also less maintenance-intensive than fireplaces, and they often have digital controls that make it simple to control the amount of heat produced. Some models can even be hooked up to a thermostat, and then programmed, which helps homeowners save money on heating costs.
When you are choosing a stove made of pellets you should select one that has been approved by the U.S. Environmental Protection Agency for efficiency and clean burning and is also certified by a third-party organization like the Pellet Fuels Institute (PFI). Look for the Underwriters Laboratories certification or Canadian ULC label that confirms the stove meets safety standards.
You'll need an emergency plan in case of power outage, as these appliances depend on electricity to operate their automated functions. Certain models, such as the Piazzetta Marcella 2.0 has backup batteries that keeps the fans and feeders in operation when the power goes out.
Pellet Stoves with Pellet Inserts
Pellet stove inserts fit inside a fireplace to replace a traditional wood-burning fire. Similar to freestanding pellet stoves they provide high efficiency and heating power. They also make use of renewable sources of energy instead of fossil fuels or wood, and they do not emit greenhouse gases during combustion. Over time, the savings in energy usage will add up. You could also qualify for a 30% discount on the cost of your insert (up to $2,000 per year).
The main difference between pellet and wood fireplace inserts is that they burn milled, compressed wood byproducts, not seasoned wood. This lets them burn more hot and more quickly than natural wood-burning fireplaces. This reduces emissions and increases energy efficiency. pellet stoves dealers near me burn less fuel and produce less ash. They are also more convenient to use, with auto ignition and self-starting features that make lighting the fire easy. The fire is fed continuously by an hopper, so you don't need to manually feed it as you would with a traditional wood-burning fireplace.
Pellet fireplace inserts have a few disadvantages. For one, they require an adequate dry storage area for the pellet fuel. They also depend on electricity to power their automatic features, so they may not be a viable option in the event of an outage. Furthermore, certain models emit operational noise and therefore may not be suitable for a peaceful home.
Custom Pellet Stoves
Pellet stoves are a cleaner, more efficient alternative to traditional wood stoves and fireplaces. They burn pellets made of compressed sawdust and other wood byproducts which are more sustainable than burning real wood. They also cause less pollution than wood stoves. Pellet stoves are becoming more popular due to their low operating costs and easy to use. Whether you're looking for an efficient pellet stove to heat your basement or a new pellet stove for your home, there are a variety of options on the market.
If you are interested in purchasing a pellet stove then seek out a dealer who has expertise in these hearth products. A reliable dealer will give you expert advice, set up the stove correctly, and service it if required. A trained technician from the factory is an essential component of the process, and will help you understand the specifics of your stove's operation and maintenance requirements.
The best stove for your space is contingent on your heating requirements and the size of your home. It is generally recommended to select one that can supply 5,000 British Thermal Units (BTUs) which is a form of heating power, for each 200 square feet of living space. It is also important to consider how much you're willing spend on fuel as well as other sources of heat in your home.
It's important to know that pellet stoves are designed for supplemental heating, and not for primary heating. They don't replace a furnace, and are not intended to be used in homes that have inadequate insulation. They should only be used in areas where there is enough access to the existing venting system. Be aware that pellet stoves require electricity for their automated features like the pellet feeder and fans. These appliances can be operated manually or via batteries in the event that power goes out.
Pellet Stove Repair
Pellet stoves require regular maintenance to operate safely and efficiently. To avoid future costly repairs, it's important to know the signs of a stove that is having problems. If the flame is moving lazily with black tips, it's likely that there is not enough air. This problem may be caused by dirty burners, a blocked auger or hopper, or an insufficient temperature setting. It is best to speak with an expert in this case.
A professional will typically evaluate a pellet stove's needs and perform necessary maintenance for $100-$150 per hour. This includes cleaning the stove, replacing or replacing the exhaust fan, and lubricating the moving parts. Repair costs may vary based on the nature of the problem, and an experienced technician should give an estimate before performing work.
Smoke or soot coming out of the chimney, low heating, and noisy operation are all signs that require professional attention. A malfunctioning damper or blower can also cause these issues. A local fireplace technician can replace the blower for $275 to $440, or the damper for $380 to $550.
Another frequent issue is that the motor of the auger fails. This is a serious problem, as it affects the stove's ability to pump the fuel into the burner. The auger motor is priced between $80 and $150 and it could take a local fireplace technician between three and four hours to install the replacement. It is recommended to clean the hopper and firepot on a routine basis. This will reduce the amount of ash that collects on the glass door and impedes the view of the flame. A local fireplace technician, for example can take off the burnpot cover and use a brush to sweep the accumulated ash.
Pellet Stove Installation
Installing a pellet stove inside a new house or converting it into a wood-burning fireplace is possible. Installation costs vary depending on the location. They start at $1000 for a freestanding model and range from $3,000 to $5,000 for wall-mounted units. A venting system may add up to $1,200 to the price, depending on whether it's going to be an ordinary horizontal vent or a ceiling vent that requires a chimney.
Pellet stoves provide a variety of advantages that make them more convenient and economical than other heating methods. They consume less fuel than wood or gas stoves and are able to turn on and off automatically at predetermined times. They also allow you to choose between high and low temperature settings which makes them more adaptable than traditional wood stoves.
The kind and size of pellet stove you need will depend on the amount of heat you require for your home. As a general rule, you will need approximately 5 000 British Thermal Units to heat 200 square foot of living space. This calculation is affected by variables like insulation and climate.
When you are looking for a pellet stove, consider how much fuel you need and where you will store it in your home. A dealer can tell you the amount of BTUs you require by visiting your home and taking measurements. A professional can recommend the ideal pellet stove for your home, in accordance with the space you require to heat.
A pellet stove uses electricity to run its motorized components, therefore it must be located near a power outlet that can handle 110 volts. Installing a backup generator can allow you to keep your pellet stove operating in the event of a power failure.